» Home>Products>TA Series
Automatics TraubType Single Spindle
TA Series - TA16 / TA25 / TA32(H)
Capacity :
- 16 ; 25 ; 32 mm Round
- Long Turn Slide
- 4 - Pos Turret
- Polygonal , Thread Milling
- Synchronous Drive Spindle
- Interchangeable with Traub A25
| Model | TA16 | TA25 | TA32(H) | TLA16 | TLA25 | TLA32(H) | |
| Maximum capacity |
round | 16mm (5/8") |
25mm (1") |
32mm (1 1/4") |
16mm (5/8") |
25mm (1") |
32mm (1 1/4") |
| hexagon | 13mm (1/2") |
22mm (7/8") |
27mm (1 1/16") |
13mm (1/2") |
22mm (7/8") |
27mm (1 1/16") |
|
| square | 11mm (7/16") |
18mm (23/32") |
22mm (7/8") |
11mm (7/16") |
18mm (23/32") |
22mm (7/8") |
|
| Maximum turning length (LTA) | 70mm (2 3/4") | 70mm (2 3/4") | |||||
| Stroke of cross silde | 22mm (7/8") | 22mm (7/8") | |||||
| Max. capacity of tailstock collet | 13mm (1/2") | 13mm (1/2") | |||||
| Max. tailstock travel | 100mm (4") | 100mm (4") | |||||
| Spindle speed | 700-7,500 rpm (20 steps) |
550-4,200 rpm (12 steps) |
300-2,750 rpm (12 steps) |
200-6,000 rpm (40 steps) |
150-4,200 rpm (40 steps) |
150-4,200 rpm 210-2,300 rpm (H) |
|
| Production rate | 28 to 2,100 pcs/hr | 28 to 2,100 pcs/hr | |||||
| Cycle time | 1.71 sec/pc to 128.6 sec/pc | 1.71 sec/pc to 128.6 sec/pc | |||||
| Power rating |
work spindle motor | 1.5/1.8 kw (2.0/2.4 Hp) | 1.8/2.2kw (2.4/2.9Hp) |
2.6/0.65kw (3.5/0.9 Hp) | |||
| feed drive motor | 0.37 kw (1/2 Hp) | 0.37 kw (1/2 Hp) | |||||
| coolant pump motor | 0.1 kw (1/8 Hp) | 0.1 kw (1/8 Hp) | |||||
| Content of coolant tank | 40 Liters | 40 Liters | |||||
| Net weight of complete machine | 660 kgs | 760 kgs | 660 kgs | 760 kgs | |||
| Gross weight of complete machine | 800 kgs | 900 kgs | 800 kgs | 900 kgs | |||
| Measurement of seaworthy packing case | 1.8 Cu.M | 2.4 Cu.M | 1.8 Cu.M | 2.4 Cu.M | |||
Relative Products :